Car Care Tips

Here, at Alan Cox Automotive, we want our customers to be in the know about how to properly care for their car or truck. We want you to understand why and how your tires wear; how to get the best gas mileage; and overall how to get the most out of your tires. Hopefully, with these helpful tips you will be able to improve gas mileage and reduce tire wear when driving in and around Marietta, GA and Kennesaw, GA . We understand how important your vehicle is and why your car needs to be serviced by a Marietta, Georgia auto repair shop. So give us a call at (770) 427-1745 today to schedule your next maintenance appointment.

Car Maintenance and Care

• Change your fluids on time, every time.
• Change your oil every 3,000 miles for regular, 5,000 miles for synthetic oil
• Change antifreeze fluid every 30,000 miles.
• Change brake fluid every 2 years.
• Change transmission fluid every 30,000 miles.
• Schedule a maintenance check every 15, 30, 60, and 90,000 miles.
• Replace your air filter every 12 months or 12,000 miles (whichever comes first).
• Replace your fuel filter at interval recommended by manufacturer.

Tire Maintenance and Care

• Rotate your tires every 6,000 miles or every 6 months.
• Check your tire pressures approximately once a week. Low tire pressures can affect fuel economy, handling and comfort. To accurately measure your tire pressure, check tires when they are cold. Wait at least three hours after driving.
• Always make sure that your wheels are properly aligned. Badly aligned wheels will again lead to dragging of the car on the road.
• Check your spare tire each month and keep it properly inflated so it¹s ready to go when you need it most.
• Use the penny trick to determine if the tread on your tires is worn to low. Take a penny and put Abraham Lincoln's head into one of the grooves of the tread. If part of his head is covered by the tread, you're ok. If you can see all of his head, it's time to replace the tire. When the tread is worn down to 1/16 of an inch, tires must be replaced.

And most important of all……

• Always check for potential problems before they happen.